Herramientas de usuario

Herramientas del sitio


personas:jero98772:antena-direcional-pringler:p-node-comandos

link of proyect https://p-node.org/documentation/pibox/piboxv2_image and https://www.p-node.org/documentation upload imen with etcher http://www.p-node.org/pibox_img/pibox_V2.img or see de devices coneted df -h upload iso(img) sudo dd if=2018-04-18-raspbian-stretch.img of=/dev/sdb status=progress bs=1M when finish sudo sync ssh pi@<IP_of_the_pibox> cd pibox_V2 git pull

opcional expand file system sudo raspi-config

change wifi sudo nano /etc/hostapd/hostapd.conf upadate and ugrade all and install things sudo apt-get update sudo apt-get upgrade

sudo apt-get install git sox libav-tools oggfwd python3-pip sudo pip3 install bs4

install radio cd git clone http://git.rybn.org/rybn/pibox_V2.git

install other things sudo apt-get install hostapd dnsmasq

stop services sudo systemctl stop dnsmasq sudo systemctl stop hostapd

create this and put it sudo nano /etc/hostapd/hostapd.conf interface=wlan0

driver=nl80211
ssid=myssid
hw_mode=g
channel=7
wmm_enabled=0
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0

open and other file sudo nano /etc/default/hostapd edit this #DAEMON_CONF=“” for

DAEMON_CONF="/etc/hostapd/hostapd.conf"

copy an file and edit sudo cp /etc/dnsmasq.conf /etc/dnsmasq.conf_back echo “” | sudo tee /etc/dnsmasq.conf

put this sudo nano /etc/dnsmasq.conf interface=wlan0

# Use the require wireless interface - usually wlan0
dhcp-range=192.168.100.2,192.168.100.10,255.255.255.0,24h

put this sudo nano /etc/dhcpcd.conf

interface wlan0
static ip_address=192.168.100.1/24
nohook wpa_supplicant

start services sudo systemctl restart dhcpcd sudo systemctl unmask hostapd sudo systemctl start hostapd sudo systemctl enable hostapd sudo systemctl start dnsmasq

set name

sudo hostnamectl set-hostname "pibox"

put this after exit 0 sudo nano /etc/rc.local like this

		#!/bin/sh -e
		#
		# rc.local 
		#
		# This script is executed at the end of each multiuser runlevel.
		# Make sure that the script will "exit 0" on success or any other
		# value on error.
		#
		# In order to enable or disable this script just change the execution
		# bits.
		#
		# By default this script does nothing.
		# Print the IP address 
		_IP=$(hostname -I) || true
		if [ "$_IP" ]; then
		  printf "My IP address is %s\n" "$_IP"
		fi

this /usr/bin/python3 /home/pi/pibox_V2/go.py 2> /home/pi/pibox_V2/error_log.txt >/dev/null &

		exit 0

/usr/bin/python3 /home/pi/pibox_V2/go.py 2> /home/pi/pibox_V2/error_log.txt >/dev/null & create rules

put this sudo nano /etc/udev/rules.d/70-persistent-net.rules

 ACTION=="add", SUBSYSTEM=="net", DRIVERS=="r8188eu", NAME="wlan1"

shutdown sudo halt

wifi ssid pibox password pnodeaccesspass https://p-node.org/documentation/pibox/piboxv2 https://p-node.org/documentation/pibox/pibox_antenna

personas/jero98772/antena-direcional-pringler/p-node-comandos.txt · Última modificación: 2020/02/08 01:20 por jero98772