no way to compare when less than two revisions

Diferencias

Muestra las diferencias entre dos versiones de la página.

@@ Línea 1: / Línea 1: @@
+link of proyect https://p-node.org/documentation/pibox/piboxv2_image  and https://www.p-node.org/documentation
+upload imen with etcher
+http://www.p-node.org/pibox_img/pibox_V2.img
+or
+see de devices coneted
+ df -h
+upload iso(img)
+ sudo dd if=2018-04-18-raspbian-stretch.img of=/dev/sdb status=progress bs=1M
+when finish
+ sudo sync
+ssh pi@<IP_of_the_pibox>
+cd pibox_V2
+git pull
+opcional
+expand file system
+sudo raspi-config
+change wifi
+ sudo nano /etc/hostapd/hostapd.conf
+upadate and ugrade all and install things
+ sudo apt-get update
+ sudo apt-get upgrade
+ sudo apt-get install git sox libav-tools oggfwd python3-pip
+ sudo pip3 install bs4
+install radio
+ cd
+ git clone http://git.rybn.org/rybn/pibox_V2.git
+install other things
+ sudo apt-get install hostapd dnsmasq
+stop services
+ sudo systemctl stop dnsmasq
+ sudo systemctl stop hostapd
+create this and put it
+ sudo nano /etc/hostapd/hostapd.conf
+ 	interface=wlan0
+	driver=nl80211
+	ssid=myssid
+	hw_mode=g
+	channel=7
+	wmm_enabled=0
+	macaddr_acl=0
+	auth_algs=1
+	ignore_broadcast_ssid=0
+open and other file
+ sudo nano /etc/default/hostapd
+ edit this #DAEMON_CONF="" for
+	DAEMON_CONF="/etc/hostapd/hostapd.conf"
+copy an file and edit
+ sudo cp /etc/dnsmasq.conf /etc/dnsmasq.conf_back
+ echo "" | sudo tee /etc/dnsmasq.conf
+put this
+ sudo nano /etc/dnsmasq.conf
+ 	interface=wlan0
+	# Use the require wireless interface - usually wlan0
+	dhcp-range=192.168.100.2,192.168.100.10,255.255.255.0,24h
+put this
+ sudo nano /etc/dhcpcd.conf
+	interface wlan0
+	static ip_address=192.168.100.1/24
+	nohook wpa_supplicant
+start services
+ sudo systemctl restart dhcpcd
+ sudo systemctl unmask hostapd
+ sudo systemctl start hostapd
+ sudo systemctl enable hostapd
+ sudo systemctl start dnsmasq
+set name
+  sudo hostnamectl set-hostname "pibox"
+put this after exit 0
+ sudo nano /etc/rc.local
+ like this
+			#!/bin/sh -e
+			#
+			# rc.local
+			#
+			# This script is executed at the end of each multiuser runlevel.
+			# Make sure that the script will "exit 0" on success or any other
+			# value on error.
+			#
+			# In order to enable or disable this script just change the execution
+			# bits.
+			#
+			# By default this script does nothing.
+			# Print the IP address
+			_IP=$(hostname -I) || true
+			if [ "$_IP" ]; then
+			  printf "My IP address is %s\n" "$_IP"
+			fi
+this		/usr/bin/python3 /home/pi/pibox_V2/go.py 2> /home/pi/pibox_V2/error_log.txt >/dev/null &
+			exit 0
+/usr/bin/python3 /home/pi/pibox_V2/go.py 2> /home/pi/pibox_V2/error_log.txt >/dev/null &
+create rules
+put this
+ sudo nano /etc/udev/rules.d/70-persistent-net.rules
+	 ACTION=="add", SUBSYSTEM=="net", DRIVERS=="r8188eu", NAME="wlan1"
+shutdown
+ sudo halt
+wifi
+ ssid pibox
+ password pnodeaccesspass
+https://p-node.org/documentation/pibox/piboxv2
+https://p-node.org/documentation/pibox/pibox_antenna