¡Esta es una revisión vieja del documento!
link of proyect https://p-node.org/documentation/pibox/piboxv2_image and https://www.p-node.org/documentation upload imen with etcher http://www.p-node.org/pibox_img/pibox_V2.img or see de devices coneted df -h upload iso(img) sudo dd if=2018-04-18-raspbian-stretch.img of=/dev/sdb status=progress bs=1M when finish sudo sync ssh pi@<IP_of_the_pibox> cd pibox_V2 git pull
opcional expand file system sudo raspi-config
change wifi sudo nano /etc/hostapd/hostapd.conf upadate and ugrade all and install things sudo apt-get update sudo apt-get upgrade
sudo apt-get install git sox libav-tools oggfwd python3-pip sudo pip3 install bs4
install radio cd git clone http://git.rybn.org/rybn/pibox_V2.git
install other things sudo apt-get install hostapd dnsmasq
stop services sudo systemctl stop dnsmasq sudo systemctl stop hostapd
create this and put it sudo nano /etc/hostapd/hostapd.conf interface=wlan0
driver=nl80211 ssid=myssid hw_mode=g channel=7 wmm_enabled=0 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0
open and other file sudo nano /etc/default/hostapd edit this #DAEMON_CONF=“” for
DAEMON_CONF="/etc/hostapd/hostapd.conf"
copy an file and edit sudo cp /etc/dnsmasq.conf /etc/dnsmasq.conf_back echo “” | sudo tee /etc/dnsmasq.conf
put this sudo nano /etc/dnsmasq.conf interface=wlan0
# Use the require wireless interface - usually wlan0 dhcp-range=192.168.100.2,192.168.100.10,255.255.255.0,24h
put this sudo nano /etc/dhcpcd.conf
interface wlan0 static ip_address=192.168.100.1/24 nohook wpa_supplicant
start services sudo systemctl restart dhcpcd sudo systemctl unmask hostapd sudo systemctl start hostapd sudo systemctl enable hostapd sudo systemctl start dnsmasq
set name
sudo hostnamectl set-hostname "pibox"
put this after exit 0 sudo nano /etc/rc.local like this
#!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing.
# Print the IP address _IP=$(hostname -I) || true if [ "$_IP" ]; then printf "My IP address is %s\n" "$_IP" fi
this /usr/bin/python3 /home/pi/pibox_V2/go.py 2> /home/pi/pibox_V2/error_log.txt >/dev/null &
exit 0
/usr/bin/python3 /home/pi/pibox_V2/go.py 2> /home/pi/pibox_V2/error_log.txt >/dev/null & create rules
put this sudo nano /etc/udev/rules.d/70-persistent-net.rules
ACTION=="add", SUBSYSTEM=="net", DRIVERS=="r8188eu", NAME="wlan1"
shutdown sudo halt
wifi ssid pibox password pnodeaccesspass https://p-node.org/documentation/pibox/piboxv2 https://p-node.org/documentation/pibox/pibox_antenna